Tools & Tuning

File cleaning brush. - File brush - For cleaning files - For all maintenance of steel edges - Convenient format

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Extra hard rubber grinding stone for tuning and maintaining steel edges.

Abrasive stone for deburring the edge. - Abrasive stone, 80mm. - Deburring the edge.

Quality paper for all-round use. Small roll, 20 m.

Practical all-round brush with pocket-sized nylon bristles. Top quality. - Nylon brush - For polishing glide wax - For those who want a better skiing experience - Ergonomically designed

Often used for finishing filing when prepping steel edges or for setting up steel edges. Some people also prefer to use it for ongoing edge maintenance. - Sharp and durable - 6"/15 cm long, 20 tpcm (number of teeth per cm) - Chrome-plated

2nd cut. Medium coarse file, chrome-plated. 20 cm, 16 tpcm. The best “all round” file Swix has. Used for filing side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact

Sharp, exact and durable racing file. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Our favorite for polishing! Quality polish brushes for all waxes. Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on a wall or waxing table. It is important to use sharp scrapers when prepping. Sharp scrapers enable you to remove wax more easily and efficiently. The file can be flipped over and used on both sides for longer durability. - Sharpening tools - For plexi scrapers - For all ski waxers - Sharp file

Practical waste bag holder that can easily be attached to any SWIX waxing table. Helps keeping your work environment clean.

Extra fine diamond grindstone for polishing steel edges on skis and snowboards.100 mm. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Coarse diamond grindstone, grade #200. 100 mm. Used to bevel and tune sharp and precise edges on alpine skis and snowboards. This is one of the two grindstones that can do “everything” within this category. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Medium diamond grindstone for racing, 100 mm. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Fine diamond grindstone for skis and snowboards. 100 mm. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Practical Waxing Iron Holder for mounting on to waxing table or workbench (max. 40 mm). Reduces the risk of dropping a valuable iron on floor. Fits all SWIX Irons.

Sidewall cutter for Racing. A high-quality, easy-to-use sidewall cutter. Removes plastic on sidewalls of skis and snowboards to expose more of the steel edges. Makes filing steel edges easier. Supplied with round and square titanium blades. - Sidewall cutter - For removing plastic material - For alpine skiers and snowboarders - Precise and efficient

World Cup file guide with integrated clamp, 88° - Tool for side edges - For filing steel edges - For enthusiasts and professional waxers - Extremely precise

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.

Special fleece for base cleaning and different types of polishing. It can also be used as a base-friendly fleece when ironing in hot wax and Jetstream. - 20m x 0.15 m

Rub-on wax for all types of snow and temperatures. - Improves sliding properties and cares for the base - Polish in using the cork on the back of the package or TOKO Thermo Cork - Very convenient for waxing en route - Very convenient for the care of ski skins to prevent the formation or adhesion of ice - Also used as rust protection for ski edges

Plexi blade for removing excess wax. Extra wide for snowboards and wide freeride skis.

Base repair-stick for base damage. Just light it and drip the repair material onto the base.

Steel blade for removing base material during structure and base repair.

Grinding stone specially for working on ski and snowboard edges that have been damaged by rocks.

Grinding block for removing burrs and corrosion from ski and snowboard edges.

Universally applicable ecological hot wax for amateur enthusiasts. - For all snow conditions and temperatures - Good sliding properties - Prevents the base from drying out - Biodegradable - Protects skis from dirt and oxidation when they are stored - Resealable wax case