Filter By:
- Electronics (239)
- Eyewear (82)
- Fenders (120)
- Hydration (184)
- Lighting (301)
- Locks/Security (199)
- Nutrition (35)
- Packs/Racks/Baskets (393)
- Show More Categories
- Pumps/Inflation (195)
- Safety (114)
- Storage (51)
- Tools/Maintenance (943)
- Indoor Cycling (44)
- Other (116)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories

$65.00
The Race Belt is a hip pack that has been optimized for use in racing with fastening options that gives the rider direct access to tools and spare parts. It's a snug-fit and comfortable carrier system that can be worn under the jersey.
- Airoflex hip belt and Air Pad System for ideal carrying comfort
- Perfect pocket management—a place for everything
- Elastic mesh pockets with Velcro fastening in the back & on left hip
- Zippable pocket on right hip
- Loop for mini-pump or CO2 cartridge & inflator

$6.99
- Simple and efficient, the Alu Plast bottle cage is a classic in bicycling
- The right combination between rigidity and flexibility
- Technopolymer base and 6101-T3 aluminum cage
- Tube diameter: 5mm
- Weight: 40g

$25.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure.
- Fits Presta/Schrader
- Accurate up to 160psi
- Shows PSI and bar
- Weighs only 37g

This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors

$10.99 - $11.24
High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer
- Hexagonal ball point screwdriver
- Multi-component Kraftform handle for fast and ergonomic screwdriving
- "Take-it-easy" tool finder: color coding according to profile and size
- Hexagonal blade and ballpoint for secure working even in difficult installation situations
- The Wera Black Point tip offers an exact fit and optimum corrosion protection

$126.99
3/8" drive Zyklop bit sockets.
- Bit sockets with holding function for TORX screws
- The holding function holds screws securely on the tool
- With Take-it-easy tool finder: color coding by size
- Knurling on lower socket end for more grip when used manually
- Chrome vanadium steel, matt chrome-plated
- 1x 8767 B TORX HF 1 Zyklop bit socket set with holding function, 3/8" drive, 6 pieces
- 6x 8767 B HF TORX Zyklop bit socket with holding function, 3/8" drive: TX 25x107.0, TX 27x107.0, TX 30x107.0, TX 40x107.0, TX 45x100.0, TX 50x100.0
- 1x Hook-and-Loop Fastener Strip 120, 70 x 50 mm

$14.99
- Bit socket with 1/4 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size

L-keys with thermoplastic sleeve (SPKL) out of easy-to-grip circular material. The sleeve ensures that work is easy on the fingers, even at low temperatures. All L-keys are easy to find,l/ thanks to their color coding and size markings. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal.
- L-keys for hexagonal socket screws
- Hex-Plus allows socket head screws to live longer
- L-keys are easy to find thanks to color coding and wear-resistant size marking
- Wear-resistant clip material for enhanced durability

$157.99
3/8" drive Zyklop bit sockets.
- 9-piece bit-socket set on a robust textile belt, 3/8
- Bit-sockets with all the advantages of the Wera bit technology
- Bit-sockets with holding function for screws/bolts
- Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets
- Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System
- 1x Belt B 3 TORX HF Zyklop bit socket set with holding function, 3/8" drive, 9 pieces
- 9x 8767 B HF TORX: TX 10x35.0, TX 15x35.0, TX 20x35.0, TX 25x35.0, TX 27x35.0, TX 30x35.0, TX 40x35.0, TX 45x38.5, TX 50x38.5
- 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm
- 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

$126.99
Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission.
- T-handle is ideal for transferring controlled tightening torque and high loosening torque
- Error-free screwdriving due to non-slip friction clutch and exact torque transmission
- Tamper-proof against accidental changing of set torque value
- Corrosion-resistant blade

- Double-sided conical design for a secure, inseparable connection between the hammer handle and head.
- Hammer head made out of nylon.
- Handle out of high quality ash wood.
- Interchangeable soft-face hammer heads.

$11.99 - $29.99
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
- T-handle screwdriver for the transmission of high tightening and loosening moments
- Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working
- "Take-it-easy" tool finder: color coding according to profile and size
- With additional short arm for the transmission of extremely high torques due to the leverage of the long arm
- With holding function (HF) securely holds the hexagon socket screw on the tool

$52.99
This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself.
- Extended handlebar clamps allow greater clearance for shift and brake cables
- Requires 3.5" of handlebar clearance for mount
- Fits 7/8" to 31.8mm handlebars
- Made in USA
- Dimensions: 11.75 x 8 x 9"

$47.99
This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers.
Available in white (3133WH) or gloss black (3133GB) powder coat finishes.
- Made in U.S.A. (Maysville, KY)
- A Quick Release Basket with Bolt-on Holder for stable installation and use
- Lift the handle to remove the basket and take it with you
- Basket locks back in place when returned to the holder
- Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom
- Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar
- Handlebar clamps are 2" apart and offer clearance for shift and brake cables
- Powder Coat Finish
- Complete basket including the holder weighs 3 lbs.

Bigger and Stronger for a Better Ride
Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session.
- Ride hard. This trainer can handle sprints up to 2,000 watts.
- Work up a sweat with inclines up to 16% that hold up to your most serious sprints.
- Accuracy matters. Measure your power to within 2.5%.
- Keep crushing it with your favorite apps, including Zwift and Tacx.
- Finally, a trainer that won’t wake the whole house when you ride hard.
ACCURATE AND RELIABLE
This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%.
READY TO SPRINT
The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts.
CLIMB HIGHER
Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient.
A MORE REALISTIC RIDE
At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness.
SMOOTH AND SILENT
This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available.
IMPROVED COMPATIBILITY
The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box.
HIGHLY COMPATIBLE
The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift.
ABLE TO STAND ALONE
You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance.
DEVICE COMPATIBILITY
Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time.
TACX TRAINING SOFTWARE
Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan.
TACX TRAINING PLANS
Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

Supacaz Allen Keyz are a whole new way to bring some flair to your toolbox. But, the real beauty is in the highly engineered details. Grooved tips, diamond point ends, and angled chamfers enhance engagement with even the shallowest bolt heads. A clever secure stowing system means you'll never lose another Allen key again.
- Anti-slip grooved tips
- Diamond point end for improved torque
- Angled chamfers for improved engagement
- Secure stowing system locks wrenches in place
- 9pc Allen key set: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

$28.99 - $29.99
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible.
- 100% anodized aluminum
- LockTight Wings
- Laser etched design
- Road and MTB approved
- High-end and durable

$89.99 - $93.99
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible.
- 100% 3k Carbon
- LockTight Wings
- Hand-painted
- Road and MTB approved
- High-end and durable

$17.99
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

$15.99
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

$35.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display mount.
- Left- and right-side compatible.
- Mountain bike design situates a CPU above stem.
- Fits 35mm handlebars.

$27.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- MTB-style above-the-stem mount.
$65.00
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location.
- ANGi is a ride tracker, crash detector, and safety beacon.
- Includes a one-year subscription to Specialized Ride Premium app.
- Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates.
- Additional premium features include start ride notifications and ride-time alerts.
- Attaches to Specialized ANGi-ready helmets.
- Approximate six months' battery life on a 2032 coin cell battery.
- Weight: 10 grams w/ battery
- Two-year sensor warranty

$50.00
The Air Tool Flex MTB/Road uses an inverted chamber design that allows for quick fill-up on mountain tires but can still reach the high pressures needed for road tires.
- Twin Schrader and presta thread on T-head
- Inverted barrel design allows for efficient high volume and high pressure pumping
- Lightweight and compact hose with built-in flex to prevent excess stress on valve stems
- Water bottle boss mount included

$85.00
Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.

$130.00
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you.
- Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires.
- Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires.
- Ergonomic Wing handle with pressure relief valve.
- Auto selecting SwitchHitter II technology.
- Includes spare rubber seal for head.
- Max pressure: 40 PSI (2.7bar)
- Volume-per-stroke: 508cc
Page 1 of 101
Next page